PET Preform Lines: How DKM Delivers Faster Cycle Times

Understanding the PET Preform Production Challenge

Producers of water and carbonated beverage preforms face a consistent set of operational demands: high-cavity molds that hold tight tolerances across every cavity, injection machines capable of large melting capacity and high-efficiency injection, and delivery timelines that do not stall market entry. Within this landscape, DKM Machinery and SINO MOULD have built a combined offering that spans the injection molding machine, the preform mold, and the take-out automation — positioning PET preform production as a core area of specialization rather than a secondary product line.

Purpose-Built Machines: The DKM-PET III Series

At the center of DKM’s PET preform capability is the DKM-PET III Preform-Dedicated Injection Molding Machine, offered across four models — DKM-350 PET III, DKM-450 PET III, DKM-550 PET III, and DKM-650 PET III. Each model is matched to a specific cavitation level: the DKM-350 PET III pairs with 48-cavity lines, the DKM-450 PET III with 72-cavity lines, the DKM-550 PET III with 96-cavity (and, in specific configurations, 144/168-cavity) molds, and the DKM-650 PET III with 144-cavity production lines.

Two engineering features define this series. First, a standard electric accumulator combined with synchronized plasticizing and post-mold cooling technology shortens the molding cycle. Second, nano far-infrared heating rings reduce production energy consumption while an optimized machine frame structure supports injection repeat accuracy ≤0.5‰ — a figure that matters directly to multi-cavity consistency, since even small shot-to-shot variation compounds across dozens or hundreses of cavities.

This combination of speed and repeatability is reflected in documented cycle performance: a 144-cavity preform mold running on the DKM-650 PET III produces an 11g, 29mm neck preform at a 12.8-second cycle; a 168-cavity mold on the DKM-550 PET III produces an 11g product with a BPF 26/21 neck in an 11-second cycle; a 72-cavity standard line with the PET 450 machine achieves a 12-second cycle for a 12g, 28mm preform; and a 48-cavity standard line with the PET 350 machine achieves a 16-second cycle for the same 12g, 28mm preform. Separately, the broader PET Series Plastic Injection Molding Machine range (250 to 650 tons) is built for large melting capacity and is matched to 48, 72, 96, and 144-cavity preform lines, giving producers a choice of platform scaled to their output requirements.

To avoid lead-time bottlenecks on the equipment side, DKM maintains safety stock for the 350T, 450T, 550T, and 650T PET-dedicated models, supporting immediate delivery rather than build-to-order waiting periods.

SINO MOULD Preform Molds: Precision Engineered for Scale

On the mold side, SINO MOULD — together with its subsidiary SINO-PK — brings over 20 years of multi-cavity preform mold manufacturing expertise to the PET segment. The product range spans PET Bottle Preform Molds from 8 to 168 cavities, covering everything from small-batch trial production to full industrial-scale output.

Build quality is specified in concrete terms: key components use Swedish S136 steel at HRC45-48 hardness, the mold base is manufactured in DIN1.2311, and dimensional control reaches tolerances down to 0.01mm for uniform wall thickness and concentricity, with a precision capability of ±0.005mm. Standard neck finishes include PCO 1810 and PCO 1881, along with 28mm necks, covering a typical preform weight range of 12g to 30g. For producers whose packaging does not fit standard specifications, custom cold-half molds can be built from existing tooling to reduce new investment, and fully custom non-standard preform molds — including special neck finishes, unique bottle designs, and mixed-cavity configurations — are available with a 5 to 7 week delivery window.

For standard configurations, delivery is considerably faster: standard 48/72-cavity molds ship in 1 to 2 weeks, and a 48/72/96-cavity single-week delivery program is also available. Over 200 sets of standard PET preform molds have been delivered worldwide under this model, and every mold carries a 3-year warranty with spare parts provided free of charge during the warranty period.

Turnkey PET Preform Production Lines

Beyond standalone machines and molds, DKM and SINO MOULD jointly deliver complete PET Preform Production Lines that integrate the preform mold, the DKM-PET III injection molding machine, and a take-out robot into a single pre-commissioned system. Three standard configurations illustrate the range: Standard 1 pairs the PET 650 machine with 144 cavities and a take-out robot for an 11g/29mm preform at a 12.8-second cycle; Standard 2 pairs the PET 450 machine with 72 cavities and a dual-station external cooling robot for a 12g/28mm preform at a 12-second cycle; and Standard 3 pairs the PET 350 machine with 48 cavities and a three-station external cooling robot for a 12g/28mm preform at a 16-second cycle.

Automation is tailored to preform weight: the Out-Mold Cooling & Pick Robot cools preforms under 16g directly on the robot gripper during part removal, while preforms over 16g are handled through a combination of gripper cooling and multi-station cooling units — a design intended to compress the overall cycle for heavier preforms without extending mold time. Each line undergoes a pre-factory acceptance test under simulated production conditions before shipment, and a secured supply chain with strategic inventory of critical components supports consistent delivery.

For standard 48/72/96-cavity lines with standard 28/38mm neck finishes, delivery runs 14 days from order confirmation to qualified shipment; custom, non-standard applications are delivered in 5 to 7 weeks.

Field Performance and Delivery Discipline

These capabilities are reflected in operational outcomes reported by customers. Two 144-cavity PET preform production lines are currently running in normal production — one in Iraq and one in Iran — with customer acceptance test reports confirming satisfactory performance and payment settled in full on both projects. A 72-cavity production line with an out-mold cooling system has produced a 13.5g, 28mm neck preform at a 12-second cycle. On the delivery side, standard 48 and 72-cavity preform mold orders have moved from order to shipment in 2 weeks, consistent with the company’s stated delivery commitments announced for standard neck finishes. Continuous process refinement has also brought the 26g preform molding cycle down to 12 seconds, supported by mold component tolerances of 0.005mm.

Looking Ahead

DKM and SINO MOULD have scheduled a 72-cavity PET preform line demonstration with an 11-second cycle time for live display at CHINAPLAS 2026, continuing a pattern of incremental cycle-time reduction built on the same machine-mold-robot integration described above.

A Coordinated System, Not a Single Component

For producers evaluating PET preform investments, the practical question is rarely which single machine or mold performs best in isolation — it is whether machine, mold, and automation are engineered to work together from day one. The joint DKM and SINO MOULD approach to PET preform production — dedicated machine platforms, precision-built molds with documented tolerances, weight-matched cooling automation, and pre-commissioned turnkey delivery — reflects an attempt to answer that question directly, with cycle times, tolerances, and delivery windows stated in measurable terms rather than general claims.

https://dkm.com/pet-preform-molding-machine/
DKM Machinery

  • Related Articles

    Thin And Light 12mm Piezo Elements: SWT’s Engineering Edge

    For engineers and procurement teams searching for a thin and light 12mm piezo element, the specification touches on several interlocking requirements: ultra-thin form factor, low mass for integration into compact…

    Thin And Light 9mm Piezo Elements: SWT’s Precision Line

    When engineers search for a thin and light 9mm piezo element, they are typically solving for one of three constraints: limited board space, weight sensitivity, or acoustic/ultrasonic performance that cannot…