adminPublished: November 2026 | By Metacork Supply Chain Team
Width decides your cutting yield, roll length decides your inventory math, and packing decides whether a 40-meter roll arrives flat or creased — yet most cork fabric product pages list none of the three. Buyers who order on price alone routinely discover the hidden costs after delivery: a 140 cm roll wasted on a 130 cm pattern, or a folded shipment that needs two weeks of flattening before cutting. The fast answers: wholesale cork fabric comes in four common widths — 135 cm, 140 cm, 150 cm and 160 cm — with 135 cm and 140 cm covering most bag and upholstery programs; standard rolls run 25-50 meters on a paper tube; and export-grade cork fabric rolls are packed and shipped wholesale tube-wound, PE-wrapped and carton-packed, never folded. Metacork, the cork fabric production arm of MAS R&D (Changzhou) Co., Ltd., runs a 1350 mm lamination line, and this guide explains what those numbers mean for your purchase order.
1. What Width Does Cork Fabric Come in for Wholesale?
The direct answer to what width does cork fabric come in for wholesale: four standards dominate the market — 135 cm, 140 cm, 150 cm and 160 cm. Width is set by the lamination line, not by the cork: Portuguese cork veneer sheets and Chinese lamination equipment each impose their own limits, which is exactly why 135 cm and 140 cm both exist. Understanding that distinction is the whole story of cork fabric roll width 135cm vs 140cm explained in one sentence — 135 cm reflects common Chinese lamination line widths (Metacork's standard is 1350 mm), while 140 cm reflects Portuguese-origin cutting traditions; neither is "better", but they nest patterns differently.
• 135 cm / 1350 mm: the workhorse width for bags, wallets and most upholstery panels; Metacork's lamination standard, with roughly 2-3 cm of trim edge on each side of the usable width.
• 140 cm: common among Portuguese suppliers; offers a few extra centimeters that help one-way-nap patterns and wallpaper drops, at prices that typically run 5-10% higher per square meter.
• 150-160 cm: specialty widths for wide upholstery, wall panels and automotive layouts; fewer suppliers stock them, so lead times are longer and MOQs higher.
Before comparing quotes, run your pattern layout against the real usable width, not the nominal one: a 1350 mm roll with trim yields about 1320 mm of clean fabric, and a bag panel program that nests at 128 cm will use that width efficiently, while a pattern needing 138 cm will force a second seam no matter how cheap the quote is. In practice, cork fabric roll width 135cm vs 140cm explained for a working purchase order comes down to one test: lay your largest panel on the usable width and see what is left over. Roll length follows the same logic — standard wholesale rolls run 25-50 m depending on thickness, because thicker veneer means fewer meters per roll at the same diameter. Ask each supplier for meters per roll, rolls per carton, and usable-versus-nominal width in writing; those three numbers make quotes from different factories directly comparable.
✅ Bottom line: Four widths exist (135/140/150/160 cm) because lamination lines differ — match usable width to your pattern layout first, and let price follow yield, not the other way round.
2. How Are Cork Fabric Rolls Packed and Shipped Wholesale?
Packing is where careless suppliers lose your money, so it is worth knowing exactly how cork fabric rolls are packed and shipped wholesale before you wire a deposit. Export-standard practice has four layers: every roll is wound on a 3-inch (76 mm) paper tube — never folded, because fold creases in cork veneer never fully disappear; the roll is wrapped in PE film or foam sleeve to block moisture and scuffing; roll ends are capped or taped to protect the veneer edge; and rolls are packed vertically into double-wall export cartons, typically 25-50 m of fabric per carton depending on thickness and width. Palletized sea freight is standard for full-container orders; air shipments of sample rolls travel in individual cartons with the same tube-wound construction.
Three packing details worth writing into your purchase order. First, specify tube-wound only — some suppliers fold shorter runs into cartons to save freight, and the creases will show in your finished panels. Second, ask for moisture protection (PE wrap plus a desiccant in the carton) if your goods will transit a humid port; cork is naturally water-resistant but the cotton or PU backing is not. Third, confirm carton markings with roll numbers matched to a batch spec sheet — Metacork labels every roll with its batch, measured thickness and peel-strength record, so any downstream QC claim can be traced to the exact production run rather than an anonymous pallet.
For custom programs, packing flexes with the product: MAS R&D (Changzhou) Co., Ltd. offers OEM/ODM runs with custom roll lengths (as short as 10 m for pilot programs), private-label carton printing, and low MOQ first shipments so design teams can test a width before committing to a full wholesale container. If you are comparing suppliers, our cork fabric line ships worldwide from a single factory, and the full cork material catalog covers sheets, rolls and granules under one spec system.
✅ Bottom line: Insist on tube-wound, PE-wrapped, carton-packed rolls with batch labeling — three written packing clauses cost nothing now and save an entire production run later.
Frequently Asked Questions
Q: What width does cork fabric come in for wholesale?
A: The four common standards are 135 cm, 140 cm, 150 cm and 160 cm. Metacork's lamination standard is 1350 mm, which suits most bag, wallet and upholstery programs; always compare usable width after trim, not nominal width.
Q: How many meters are on one roll, and what is the usual MOQ?
A: Standard rolls run 25-50 m depending on thickness; MOQs vary by supplier — many factories quote 100-300 m per design, while low-MOQ pilot runs (from 10 m) are available through OEM/ODM sampling programs.
Q: Can I get custom widths, private-label packing and wholesale rolls from one factory?
A: Yes. MAS R&D (Changzhou) Co., Ltd. produces custom cork fabric with wholesale rolls up to 1350 mm, private-label carton printing and factory-direct shipping worldwide.
Get a Roll Spec Sheet Before You Order
Send Metacork your pattern width, target thickness and monthly volume. Our supply chain team will reply within 24 hours with usable-width calculations for your layout, roll and carton configurations, and factory-direct OEM/ODM wholesale pricing.
www.mascorktech.com
MAS R&D (Changzhou) Co., Ltd.