DKM PET Preform Injection Molding Machine Capacity Explained

Manufacturers evaluating a PET preform injection molding machine often center their decision on one question: how much capacity does the equipment actually deliver, and will that capacity hold up in continuous, multi-cavity production? DKM Machinery, operating alongside SINO MOULD, has built a dedicated PET preform equipment and mold system designed to answer that question with documented tonnage ranges, cavity configurations, and cycle-time data rather than general claims.

Tonnage Range and Machine Platforms for PET Preform Production

DKM offers two related platforms relevant to PET preform capacity planning. The PET Series Plastic Injection Molding Machine is a hydraulic toggle PET preform injection molding machine range from 250 to 650 tons, built with a PET-dedicated barrel and injection design intended to support consistent high-cavity preform production. Machines in this range are matched to 48, 72, 96, and 144-cavity preform lines, giving producers a direct correspondence between clamping tonnage and the mold cavitation they intend to run.

Alongside this, the DKM-PET III Preform-Dedicated Injection Molding Machine lineup narrows the offering into four specific models: DKM-350 PET III, DKM-450 PET III, DKM-550 PET III, and DKM-650 PET III. Each model is paired to a defined cavity count: the DKM-350 PET III pairs with a 48-cavity line, the DKM-450 PET III pairs with a 72-cavity line, the DKM-550 PET III pairs with 144-cavity preform molds, and the DKM-650 PET III pairs with a 144-cavity production line. This model-to-cavity mapping is a practical reference point for buyers trying to size equipment against target output volumes rather than tonnage alone.

Capacity Features Built Into the PET III Platform

Three engineering characteristics define how DKM positions capacity on the PET III series. First, efficiency: a standard electric accumulator for synchronized plasticizing is combined with post-mold cooling technology, which is described as a method to shorten molding cycles. Second, energy use: nano far-infrared heating rings are used to reduce production energy consumption. Third, repeatability: an optimized machine frame structure supports injection repeat accuracy of ≤0.5‰, which is presented as a factor supporting stable multi-cavity preform production — a relevant consideration for producers running molds with dozens to well over a hundred cavities, where shot-to-shot consistency across every cavity directly affects scrap rate and part acceptance.

Cycle Time Performance Across Cavity Configurations

Cycle time is where capacity claims become verifiable, and DKM documents several specific combinations. On the DKM-650 PET III, a 144-cavity preform mold achieves a 12.8-second cycle time while producing an 11g, 29mm neck preform. A 168-cavity mold run on the DKM-550 PET III, producing an 11g product with a BPF 26/21 neck, achieves an 11-second cycle. A 72-cavity standard line paired with the PET 450 machine achieves a 12-second cycle for a 12g, 28mm preform, and a 48-cavity standard line with the PET 350 machine achieves a 16-second cycle for the same 12g, 28mm preform. Separately, a 26g preform mold is reported to run a 12-second cycle, and a 72-cavity PET preform production line with an out-mold cooling system has produced a 13.5g, 28mm neck preform at a 12-second cycle. These figures give buyers a concrete basis for estimating hourly or daily output once cavity count, part weight, and machine model are known, rather than relying on generalized speed claims.

Mold Capacity and Precision from SINO MOULD

Machine capacity is only half of the capability picture; mold cavitation and precision determine what the machine can actually realize in production. SINO MOULD and its subsidiary SINO-PK manufacture PET Bottle Preform Molds with flexible cavities ranging from 8 to 168, built with key components in Swedish S136 steel (HRC45-48) and a mold base in DIN1.2311. Tolerances are held down to 0.01mm for uniform wall thickness and concentricity, with a stated precision capability of ±0.005mm. Standard neck finishes include PCO 1810, PCO 1881, and 28mm necks, covering preform weights typically between 12g and 30g. For producers needing something outside the standard range, custom non-standard preform molds — including special neck finishes, unique bottle designs, and mixed-cavity configurations — are delivered in 5 to 7 weeks, while custom cold-half molds based on existing molds are also offered to reduce additional customer investment.

Delivery Timelines Tied to Capacity Decisions

Capacity planning is not only about output per hour; it is also about how quickly a line can be brought online. DKM positions its 48/72-cavity standard production lines, built with standard 28/38mm neck finishes, for delivery from order confirmation to qualified shipment in 14 days. Standard PET preform molds in the 48/72-cavity range are delivered in 1 to 2 weeks, and a 48/72/96-cavity single-week delivery program is also referenced. This is supported by safety stock maintained for the 350T, 450T, 550T, and 650T DKM-PET III models and auxiliary equipment, allowing standard configurations to move from order to pre-factory acceptance testing without waiting on long component lead times. Every complete line undergoes pre-factory acceptance testing under simulated production conditions before shipment, which is intended to reduce start-up risk once the line reaches the customer’s facility.

Warranty Coverage Supporting Long-Term Capacity

Sustained capacity depends on uptime over years, not just the first production run. DKM backs PET preform molds with a 3-year warranty that includes free spare parts during the warranty period, reflecting an approach where mold life and machine reliability are treated as part of the capacity equation rather than a separate after-sales matter.

Documented Field Deployment

Capacity figures are reinforced by field examples drawn from DKM’s project record. Two 144-cavity PET preform production lines are currently in operation — one in Iraq and one in Iran — both running under normal production, with customer acceptance test reports confirming satisfactory performance and payment settled in full for both projects. A 72-cavity PET preform production line with an out-mold cooling system, producing a 13.5g, 28mm neck preform at a 12-second cycle, has also been demonstrated, and a 72-cavity PET preform line demonstration with an 11-second cycle time is planned for CHINAPLAS 2026.

 

Conclusion

For producers sizing a PET preform injection molding machine, capacity is best evaluated as a combination of tonnage, cavity count, cycle time, and mold precision rather than any single specification. DKM’s PET Series and DKM-PET III platforms, paired with SINO MOULD’s preform mold manufacturing covering 8 to 144 cavities, provide a documented framework — from 250T to 650T machines, 48 to 144-cavity molds, cycle times from 11 to 16 seconds depending on configuration, and repeatability of ≤0.5‰ — that gives buyers measurable data points for matching equipment to their production targets.

 

https://dkm.com/pet-preform-molding-machine/
DKM Machinery

  • Related Articles

    PET Preform Machine Selection: DKM’s Proven Approach

    Understanding the PET Preform Machine Selection Challenge Choosing the right PET preform injection molding machine is one of the most consequential decisions a beverage or water packaging producer will make.…

    PET Preform Machine Selection Guide: DKM 2025 Proven Lineup

    Understanding PET Preform Machine Selection Choosing the right PET preform injection molding machine is one of the most consequential decisions a beverage packaging producer can make. The selection directly affects…